Directions

1. Tear aluminum pouch at notch to expose pad. Do not touch the exposed pad directly.

2. Slide the pad into the side slot of the Vapor-Plug Unit completely.

3. Insert the Vapor-Plug Unit into a 120-volt electrical outlet with the night light on the bottom (rotate unit if necessary).

4. Replace the pad after 8 hours of use.

Replacement Pads: Unplug the Vapor-Plug Unit. Allow to cool for 10 minutes. Open the refill pad and insert as described above. Inserting a new pad will push out the old one. Discard the old pad. When using the Vapor-Plug Unit with an inserted pad, do not leave the unit in the outlet for more than 16 hours at a time. Replace the pad before the next use.

Night Light Use: Unplug the Vapor-Plug Unit. Allow to cool for 10 minutes. Remove the pad to use the Vapor-Plug Unit as a night light. Discard the old pad.

PediaCare Gentle Vaporizer Refill Pads are for use only with the PediaCare Gentle Vapor Unit. Do not use any other pad or oil with the Vapor-Plug Unit. A light layer of oil may form on the Vapor-Plug Unit during use. If this occurs, unplug the unit and wipe it with a dry cloth.

Usage Tips: Allow 60–90 minutes for the vapor to fill the room. The strength of the vapor will vary depending on the size of the room and ventilation. The vapor will be stronger the closer the unit is to the user.

IMPORTANT: Do not disassemble the unit or the night light. When the night light burns out, replace the entire unit. Read the instructions on the package before use. Use only in a properly working 120-volt electrical outlet. Do not use with extension cords. Do not block the airflow of the Vapor-Plug Unit or the light sensor on the bottom. If the light sensor is blocked, the night light will stay on. Do not plug anything above the Vapor-Plug Unit. Do not use in small, confined areas or near pets without adequate ventilation. Do not place the exposed pad on furniture. Keep the pad away from fabrics, bedding, and other materials that could present a fire hazard.